3-12 Configuring Your System

Feature Choices or
Display Only Description Your Setting
Power Switch
Mask Masked
Unmasked Determines whether power switch
is masked or unmasked. Selecting
"Masked" disables power-off with
the power switch after the
operating system is started
(including shutdown by pressing
the Power switch for at least 4
seconds.)
Option ROM
Menu Mask Unmasked
Masked Determines whether Option ROM
Menu Mask is masked or
unmasked.
System Hardware Menu
Feature Choices or
Display Only Description Your Setting
Thermal Sensor Refer to Thermal Sensor
Submenu.
Wake On Events Refer to Wake On Events
Submenu.
AC Link Power On
Last State
Stay Off
Determines the mode of AC
Link. This determines the state
of the server when AC power
is reapplied (see Table below).
Note: When "Wake On LAN" is
enabled, Stay Off is the only
choice for selection.
Error Log
Initialization Press Enter Request to initialize the
System Error Log now.
If Clear OK, then display
"System Event Log Cleared!"
If Clear NG, then display
"System Event Log Not
Cleared!"
Console
Redirection Additional setup menus to
configure console.
The Boot-time diagnostic
screen is enabled if redirection
is enabled.
Ft Memory Press Enter

Server Power State Versus AC Link Settings

Setting
State Before Power Off Stay Off Last State Power On
In Service Off On On
Out of Service (DC Power Off) Off Off On
Forced Shutdown* Off Off On