CRU Replacement and Server Upgrades 4-15
Figure 4-13. Installing the Thermal Cooling Sheet
10. Position the heat sink on the processor. See Figure 4-14.
Figure 4-14. Installing the Processor Heat Sink
11. Install both heat sink clips as follows:
!
CAUTION
Do not allow the heat sink to rock back and forth while
securing the heat sink clips. If the CPU becomes dislodge d
from the socket, catastrophic failure may occur.
Place the heat sink clip on the center tab of the retention module and
rotate the clip towards the heat sink to engage the center tab (1).
Repeat this step with the second clip (2). See Figure 4-15.