PCI Module Status LEDs (1 and 2) and Disk Access LED

The PCI module has three LEDs that combined, indicate the status of the PCI modules and hard disks. These LEDs are located on the front of each PCI module in the server and are described in Table 1-2. Refer to Figure 1-3 for the location of these three LEDs on the front of the PCI Module. The two PCI Module status LEDs are also visible from the rear of the server. Refer to Figure 1-5 for the location for these LEDs on the rear of the server.

Table 1-2. PCI Module Status and Disk Access LEDs

LED indications

Description

Action

1

2

Disk

Access

 

 

 

 

 

 

Off

Green

Green

Status LEDs and Disk Access LED stay

 

 

 

green on both PCI modules, they operate

 

 

 

 

normally in duplex mode.

 

 

 

 

 

 

 

 

 

Status LEDs and Disk Access LED stay

Check the condition of hard disk

 

 

 

green only on one module, there is some

mirrors.

 

 

 

kind if trouble with the hard disk.

If the problem persists, contact your

 

 

 

In this case, Status LED 2 and Disk

sales agent.

 

 

 

access LED on the other PCI module

 

 

 

 

stay in amber.

 

 

 

Off

Disk Access LED is off only on one PCI

Check the condition of hard disk

 

 

 

module; power is not supplied to the hard

mirrors.

 

 

 

disk.

Remount the hard disks.

 

 

 

In this case, Status LED 2 and Disk

If the problem persists, contact your

 

 

 

access LED on the other PCI module

sales agent.

 

 

 

stay in amber.

 

 

Off

Off

AC power is not supplied to the PCI

Remount the PCI module.

 

 

 

modules.

Check the condition of power unit.

 

 

 

 

Check if the power cord is connected

 

 

 

 

correctly.

 

 

 

 

Check the condition of breaker and

 

 

 

 

UPS.

 

 

 

 

If the problem persists, contact your

 

 

 

 

sales agent.

 

Amber

Amber

Status LEDs and Disk Access LED stay

Wait until the mirroring is finished.

 

 

 

amber on both PCI modules, they are

 

 

 

 

shifting to duplex mode by mirroring.

 

 

 

 

The PCI module is mounted correctly

Start the other PCI module to use ft

 

 

 

and operates in simplex mode.

series features. If the problem

 

 

 

 

persists, contact your sales agent.

Red

Green

Off

The PCI module is performing diagnosis.

Off

Off

On standby (AC power is supplied

After turning on the power, wait for the

 

 

through the cord, but the system has not

OS to start. When the OS starts and

 

 

been powered on yet.)

duplex mode is established, the

 

 

 

indications will get back to normal. If

 

 

 

they do not get back to normal,

 

 

 

remount the CPU module.

 

 

Power is not supplied due to a failure of

Remount the CPU module. If the

 

 

the CPU module.

problem persists, contact your sales

 

 

 

agent.

Amber

Green

Memory is being dumped.

 

 

Amber

 

 

 

 

 

 

1-18 System Overview

Page 35
Image 35
NEC 320Lb-R manual PCI Module Status LEDs 1 and 2 and Disk Access LED, PCI Module Status and Disk Access LEDs