PCI Board
Retainer Bracket
Rear Slot Cover
Figure 4-28. Rear Slot Cover and Retainer Bracket Locations
8.Holding the PCI board by its top edge or upper corners, firmly press the board into the PCI expansion slot on the PCI module board. The tapered foot of the PCI board retaining bracket must fit into the mating slot in the expansion slot frame. See Figure
PCI Board
Figure 4-29. Installing the PCI Board.
NOTE: Check to see if the edge of the bracket (taper) is inserted into a slot of the chassis. In the case of a long board, check also to see if its other edge is inserted into the bracket guide.
9.Install the PCI board retaining bracket. See Figure
