NEC 320Lb-R manual Maintenance

IMPORTANT:

!Power off the server before connecting peripheral devices, with the exception of peripherals with USB interface. Connecting a powered peripheral device to the powered server will cause malfunctions and failures.

!To connect a third-party peripheral device or interface cable to the server, check with your sales agent to see if they are compatible with the server. Some third-party devices may not be used with the server.

!The total cable length of SCSI device connections is up to 6 m, including the internal SCSI cables.

!The serial port connectors are reserved for maintenance.

A tower model is shown in the following illustration. However, connections are the same for a rack-mount model, except that its modules are mounted horizontally.

IMPORTANT: Place the USB floppy disk drive on top of the tower cabinet. However, to place it on a rack-mount model, put a distance of one unit between the disk drive and the module.

USB floppy disk drive

To a SCSI backup device

To a 1000Mbps
network
		1	Reserved for
	1
			maintenance
To a 100Mbps
network			Reserved for
	2
			maintenance

Display

Keyboard (via keyboard hub to mouse)

IMPORTANT: Connection of optional devices

!In the standard configuration, complete setup of the operating system before installing optional PCI cards or hard disks.

2-10 Setting Up the System