NEC 320Lb-R manual Installing a PCI Module, Locking the PCI Module in the Chassis

Installing a PCI Module

1.Observe the safety and ESD precautions listed at the beginning of this chapter.

2.Position the locking latches on the front of the PCI module in the unlocked position.

3.With the assistance of another person, support the PCI module with both hands and carefully slide it into the chassis until it is firmly seated in its connector.

4.Push the locking handles all the way their locked position. See Figure 4-24.

Figure 4-24. Locking the PCI Module in the Chassis.

5.Hand-tighten the two thumbscrews that fasten the PCI module locking latches to the cabinet.

Note: Hand-tighten the thumbscrews only as much as required to activate the interlock switch that allows power to be applied to the CPU module.

7.Close and lock the front door on the tower cabinet or front covers on the rack-mount system. See Opening and Closing the Front Bezel earlier in this chapter.

4-24 CRU Replacement and Server Upgrades