NEC 320Lb-R manual Boot Menu, Exit Menu, Boot Device Priority Menu

Feature	Choices or	Description	Your Setting
	Display Only
Size	[0]	Size of ft Memory is specified (MB)
Start Address	-	Shows the start address of ft Memory (view
		only)

Boot Menu

Use the up or down arrow keys to select a device, then press the <+> or <-> keys to move the device higher or lower in the boot priority list.

Boot Device Priority Menu

Boot Priority	Device	Description	Your Setting
1.	ATAPI CD-ROM	Attempts to boot from an
	Drive	ATAPI CD-ROM drive.
2.	Removable	Attempts to boot from a
	Devices	diskette drive.
3.	Hard Drive	Attempts to boot from a hard
		drive device.
4.	Intel UNDI, PXE-	Attempts to boot from a PXR
	2.0 (Build 071)	server.

Exit Menu

You can make the following selections on the Exit Menu. Select an option using the up or down arrow keys, then press <Enter> to execute the option. Pressing <Esc> does not exit this menu. You must select one of the items from the menu or menu bar to exit.

	Exit Menu
Choices	Description
Save Changes and Exit	Exits System Setup after saving all changes to CMOS.
Exit Without Saving Changes	Exits System Setup without saving setup data to CMOS.
Get Default Value	Loads default values for all Setup items.
Load Previous Values	Loads previous values from CMOS for all Setup items.
Save Changes	Writes all Setup item values to CMOS.

3-14 Configuring Your System