Selectable Boot Settings Submenu
Feature | Choices or Display Only | Description | Your Setting |
Selectable SCSI | Enabled | Specify whether the boot from the |
|
Boot | Disabled | SCSI device can be selected or |
|
|
| not selected. |
|
|
|
|
|
SCSI Bus | 0 | Select the bus to which the started |
|
| 1 | SCSI device is connected. |
|
|
|
|
|
SCSI Boot ID | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, | Set the SCSI ID of the started |
|
| 10, 11, 12, 13, 14, 15 | SCSI device. |
|
|
|
|
|
SCSI Boot LUN | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, | Select the number of the LUN to |
|
| 10, 11, 12, 13, 14, 15 | which the started SCSI device is |
|
|
| bound. |
|
|
|
|
|
Restore Default Settings Submenu
When "Restore Default Settings" is selected the screen for returning the setting values to the default values is displayed.
Note: After restoring the default settings you must set the SCSI ID for SCSI Bus 1 to the value 6. Also, under the "Host Adapter Settings Submenu" the >4Gbyte Addressing must be set to "Enabled".
Raw NVRAM Data Submenu
When "Raw NVRAM Data" is selected the information on NVRAM installed in the host adapter is displayed in hexadecimal format and can not be edited. This function is only provided to solve problems.
Scan SCSI Bus
When "Scan SCSI Bus" is selected in the "Fast!Util Options Menu" the list of devices connected to each SCSI bus is displayed in the order of SCSI IDs. The information to be displayed includes the vendor (device manufacturer), product name, and firmware revision.
