Configuring Your System 3-11

Security Menu
Note: Enabling the Supervisor Password field requires
a password for entering Setup. The passwords are not case
sensitive.
Feature Choices or
Display Only Description Your Setting
Supervisor
Password is Clear Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (see System Board
Jumpers in this Chapter).
User Password is Clear Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (see System Board
Jumpers in this Chapter).
Set Supervisor
Password Press ENTER Supervisor password (up to 7
alphanumeric characters) controls
access to the setup utility.
When the <Enter> key is pressed,
the user is prompted for a
password; press ESC key to
abort. Once set, this can be
disabled by setting it to a null
string, or by clearing password
jumper on system board (refer to
System Board Jumpers in this
chapter).
This feature is available only when
you logged in the SETUP utility
with the supervisor password.
Set User
Password Press ENTER When the <Enter> key is pressed,
the user is prompted for a
password (up to 7 alphanumeric
characters); press ESC key to
abort. Once set, this can be
disabled by setting it to a null
string, or by clearing password
jumper on system board (refer to
System Board Jumpers in this
chapter).
With a user password, accessible
SETUP menus are restricted. This
feature is available only if the
Supervisor Password is specified.
Password on Boot Disabled
Enabled Disables or enables password
entry on boot.