Thumbscrews

LED 1

LED 2

Figure 4-22. PCI Module Status LED Indicators

4.Disconnect (if connected) all PCI cables and the network cable from the rear of the PCI module.

5.Unscrew the knurled screws securing the locking handle to the PCI module. See Figure 4-22.

6.Pull the release levers to their unlocked position. This disconnects the PCI module from its backplane. Then pull the PCI module out of the chassis until the locking latch engages. See Figure 4-23.

Locking latch

Figure 4-23. Module Locking Latch

7.Then, with the assistance of another person, push downwards (tower model) or to the right (rack-mount model) on the locking latch and carefully remove the module from the server unit and place it on a flat sturdy surface.

CRU Replacement and Server Upgrades 4-23

Page 114
Image 114
NEC 320Lb-R manual PCI Module Status LED Indicators