Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message | Description | Action | |||
0C00 |
| Rompilot reports error number | • Configuration error in | • | |
|
| xx | SETUP. | • Replace the CPU/PCI module | |
|
|
| • CPU/PCI module board is |
| board. |
|
|
| faulty. |
|
|
8600 No working | DQS value found | • DIMM is faulty | • | Replace DIMM | |
|
|
| • DIMM is not supported | • | Replace DIMM with |
|
|
|
|
| appropriate one. |
8610 MAC Address update failed – | FRB2 timeout occurred | • Replace the back panel board. | |||
| CoreI/O#010/100Mbit Ethernet COntroller | when setting MAC address, | • Replace the PCI module | ||
|
|
| and rewrite was |
| board. |
|
|
| unsuccessful. |
|
|
8611 MAC Address update failed – CoreI/O#0 | FRB2 timeout occurred | • Replace the back panel board. | |||
| Gbit Ethernet COntroller | when setting MAC address, | • Replace the PCI module | ||
|
|
| and rewrite was |
| board. |
|
|
| unsuccessful. |
|
|
8612 MAC Address update failed – | FRB2 timeout occurred | • Replace the back panel board. | |||
| CoreI/O#110/100 Mbit Ethernet Controller | when setting MAC address, | • Replace the PCI module | ||
|
|
| and rewrite was |
| board. |
|
|
| unsuccessful. |
|
|
8613 MAC Address update failed – CoreI/O#1 Gbit Ethernet Controller
FRB2 timeout occurred when setting MAC address, and rewrite was unsuccessful.
•Replace the back panel board.
•Replace the PCI module board.
