MRV Communications TS800/155, TS700/155, TS700/100, TS700/G Installation, Accessories, Description

&

JMP-L Mounting Plate

(Dimensions in mm)

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l

Chapter

5

Installation

Thischaptershowshow tomounttheTereScopeandandaccessories at the site (see Appendix D for the required material).

See Unpacking Instructions in Appendix C.

CAUTION: TereScope must be mounted in the horizontal position only; max angle 45o

Accessories

The standard mounting accessories are supplied with the transceivers (TereScope heads) in the kit. They are designed for typical mounting on horizontal and vertical surfaces.

Description

The accessories kit (supplied by MRV) consists of:

oThe Mounting Plate for TS700 and TS800

series (JMP-L)

oThe Aiming Head

oThe Installer Tool Kit (JITK-L)

The JMP-L is used for mounting the transceiver on the support surface, i.e., a horizontal concrete surface/plate only.

Screw for	Dimensions in mm
grounding
Figure 5.1a: JMP-L	Figure 5.1b: JMP-L scheme

31