M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
Typical Connection
1 - Fiber Connection
In order to implement a connection, each transceiver must be connected to the peripheral/testing equipment through fiber optic cables. A correct connection is indicated by the display on the back panel of the transceiver (see the section Display and Results pages 29 and 30).
IT IS A CROSS CONNECTION:
Scheme of the Connection to peripheral equipment
Peripheral/Testing
Equipment
TX ∃RX AND RX ∃ TX
Peripheral/Testing
Equipment
TX RX
RX TX
| IR link |
|
TX | TS | TX |
TS |
| |
UWIN | UWIN |
|
RX |
| RX |
Figure 1.11: Typical Connection for Models 155 and 155-F
2 - Copper Connection
In order to implement a connection, each transceiver must be connected to the peripheral/testing equipment with an STP cable. A correct connection is indicated by the display on the back panel of the transceiver (see the section Display and Results pages 29).
Scheme of the Connection to the peripheral equipment
Peripheral/Testing
Equipment
10BaseT
STP cable
10BaseT | 100 BaseT | |
|
| |
|
|
UWINTS
IR link
UWINTS
Peripheral/Testing
Equipment
10BaseT
STP cable
100 BaseT | 10BaseT | |
|
| |
|
|
Figure 1.12: Typical Connection for Model TS700/100
16
