MRV Communications TS800/155, TS700/155, TS700/G user manual TS700/100 Fast-Ethernet System

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l

D. TS700/100 - Fast-Ethernet System

Figure 1.6: TS700/100 Model Back Panel

Back Panel Description

Table 4: TS700/100 Back Panel Controls, Interfaces, and Indicators

Connectors

Power	Power source Terminal Block (Main or UPS)
	AC power supply (100 to 240 Vac) or DC power
	supply (24 to 60 Vdc).
100Base-TX	Copper interface (RJ45) for STP cables.
	MDI-X connection (TX: pins 3,6 and RX: pins 1,2).
	Connection to the peripheral equipment.
	This connector can be used for Power-over-Ethernet
	(PoE) but only with the Low Voltage TereScope version
	(TS100/A/FET/V3). The standard power for PoE is
	36-57 Vdc. However, the TS700/100 can operate with
	20-60 Vdc.
	See appendix I.
Management	Connection to 10Base-T SNMP management
(Optional)	interface. (To be ordered separately)
Dry Contacts	There are 2 pairs of dry contact indicators available,
	one for Air RX Link LED (Pins 1 and 2), and the
	other for 100BaseT LED (Pins 3 and for). Dry
	contacts are normally closed (25 ohms), and open in
	an alarm condition

11