MRV Communications TS800/155, TS700/155, TS700/100, TS700/G user manual Data Rate DIP switch

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l

Indicators	Air RX Flag LED	Green LED indicates data received by the Airlink
(7-segment		receiver. Turns ON at the threshold level.
display and
LEDs)	Air RX Sync LED	Yellow LED. Turns ON if the rate of the received
		Data matches the Data Rate set on the Data Rate
		DIP switch.
	F/O Main, RX Flag	Upper green LED indicates Data received by the
	LED	Fiber Optic receiver. Turns ON at the threshold
		level.
	F/O Main, RX Sync	Lower green LED. Turns ON if the rate of the
	LED	received Data matches the Data Rate set on the
		Data Rate DIP switch.
	F/O Redundant, RX	Upper green LED indicates Data received by the
	Flag LED	Fiber Optic receiver. Turns ON at the threshold
	(Optional)	level.
	F/O Redundant, RX	Lower green LED. Turns ON if the Fusion is
	Sync LED	active and there is synchronisation with the
	(Optional)	received Data.
	Optical Power 7-	Digital readout indicates the Optical Power level
	segment display	received by the Airlink receiver.
	Alignment LED	Yellow LED. Turns ON if the Alignment
		Operating Mode is selected.
	Loopback LED	Yellow LED. Turns ON in LOOPBACK mode.
		Flashing in Remote Loop mode.
	Fusion LED	Yellow LED. Turns ON if the Fusion mode is
		enabled.
		Flashing when the Fusion (radio back-up system) is
		active.
	SW Mode LED	Red LED. Turns ON if the SW Mode
		(SOFTWARE) Operating Mode is selected.
	Laser Status	Shining Red LED: Turns ON when the Laser is
		ON and turns OFF when the laser is powered off
		by pushing the DS toggle #4 ON.
	Management TX	Flashing when the RSM-SNMP is connected and
		the TereScope is transmitting management Data.
		(There is no Link indication)
	Management RX	Flashing when the RSM-SNMP is connected and
		the TereScope is receiving management Data.
		(There is no Link indication)

Alignment

Telescope

For fine alignment.

7