MRV Communications, Inc. – Insta llation Manual
54
A LIST OF THE TOOLS SUPPLIED BY MRV COMMUNICATIONS
WITH EVERY TereScope HEAD
Description Qty Where to use
a. WRENCH #8 for Aiming
Head, (M5 nut) 1 N: Grounding screw on
TereScope (see page 29)
(Also for rear door axe : I)
b
BALLDRIVER L,
WRENCH 5mm for Allen
Screw M6
1 F1 and F2: Screws for Vertical and
Horizontal coarse Aiming
c
BALLDRIVER L,
WRENCH 3mm for Allen
Screw M5
1 H: Rear Door lock captive screws
d
WRENCH #13 (M8 Hexa.
Screws) 1
A: JMP-L - Grounding screw
Screws between JMP-L and JMB
(if needed)
Screws between JMP-L and
pedestals (if needed)
e
BALLDRIVER L,
WRENCH 8mm for Allen
Screw M10
1 G1: Horizontal axis and locking
screw for horizontal aiming
f M8 SCREWS, WASHERS,
SPRINGS, NUTS 4 of each Optional. To mount JMP-L on
standard pedestal
g INSTALLATION TOOL
CASE 1 Tool case
Wrenches Kit for TS Installation