MRV Communications TS700/100, TS700/155, TS800/155, TS700/G Appendixc, Packing box contains

	M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
APPENDIXC	Unpacking Instructions for TereScope

The TereScope is shipped pre-assembled. See fig.C2

The packing box contains:

#2 x TereScope Transceivers mounted

#JITK-L : Installer tools kit and screws

#CD manuals

#Flexible ducts x 2

#Flange x 2

Fig C.1: TereScope as is packed

1. Unpack all the accessories.

2. .Before mounting, in order to make installation on the mounting surface easier, the JMP-L must first be detached and connected to the fixation surface.

To detach the JMP-L, screws ‘B’ should be loosened and screws ‘F1’ and ‘G1’ only should be removed, shown in Fig: C2, C3a and C3b. Do not remove the ‘G2’ screws !

G1

B

F1 (x2)

G2 (x2)

Figure C2: Detach JMP-L from TS

Figure C3ab and C3b: Screws to be removed G1 and F1

&KEEP IN SECURE PLACE ALL THE BOLTS AND SCREWS. YOU WILL NEED THEM FOR THE INSTALLATION.

52