TechniSat ST 6002 S
6.1.3 Setting the East/West Limits
Choose the option 
"Set Dish Limit" and press ENTER.
Then move the cursor to "Position 5000".
First move the dish west by pressing > on either RCU or on front panel until the desired west limit is obtained. (Whilst the dish is being moved the position no's will be displayed on the screen.)
E N T E R
Move the cursor using 
to "West Limit" and press ENTER.
This limit is automatically stored.
Now return to "Position" and move the dish to the east by pres- sing 
on either RCU or front panel until the desired east limit is obtained. Move the cursor using 
to "East Limit" and press ENTER. Once again this limit is automatically stored.
NOTE: The message "Jack Error" will appear on the scre- en if the actuator is not connected properly.
Press CNCL to return to System Menu.
C N C L
14
