TechniSat ST 6002 S manual Installation, Cursor Functions Function Keys, E X A M P L E

TechniSat ST 6002 S

6. INSTALLATION

6.1.Installation of Outside Unit

6.1.1.General

The following instructions assume that the system has been installed correctly so that all the satel- lites can be received.

ATTENTION: The ST 6002 S has been pro- grammed for use with a Triple-Band-LNB. With this you can receive all three frequency bands (11 GHz, DBS and 12 GHz). If you use a Dual- Band-LNB please pay attention to the changed input frequencies in the 12 GHz band (prepro- gramming pages 40 - 44).

Input frequency for Dual-Band-LNB in 12 GHz

band

=

Input frequency for Triple-Band-LNB minus

725 MHz

IMPORTANT: If you press any button whilst the dish is moving, the movement will stop imme- diately. Where possible avoid this when pro- gramming satellites and when using the auto- matic satellite search. Otherwise, satellites that have already been saved could be deleted.

The receiver ST 6002 S has many functions. For ease of use and so that it is not necessary to use a different button for each function the receiver uses "On Screen Display" and func- tion keys. In this way related functions are con- densed into "Menus". An arrow shows which function is in use. Underneath each menu the various keys which may be used are shown.

By using the CNCL key you can leave each menu without saving the alterations.

E X A M P L E -

Cursor

Functions

Function Keys

E N T E RC N C L

11