TechniSat ST 6002 S
E N T E R
Automatic Location of Satellites
1.Choose the option “Auto location” on the System Menu. The use of this function requires that ASTRA has already been stored and that a TechniSat actuator is connected to the St 6002 S. Note only satellites with a comparatively strong signal can be stored by this method.
2.Start with Eutelsat 16 E. Press the 
buttons until this satellite appears in the display. Then press ENTER and con- firm by pressing ENTER again. If the satellite is stored suc- cessfully the following message is displayed for about 3 seconds:
“Satellite peaked ... dish position stored”
E N T E R
E N T E R
17
