TechniSat ST 6002 S
| Contents | Seite | |
2 | Diagram : Front Panel, Remote Control Back Panel | 3 | |
3 | Important Safety Instructions | 6 | |
4 | Main Features of the ST 6002 S | 7 | |
5 | Breif Introduction | 8 | |
| 5.1 | Installation | 8 |
| 5.1.1 | Connection of the outside unit and television8 |
|
| 5.1.2 | Setting up the receiver | 9 |
| 5.2 | Operation | 10 |
6 | Installation | 11 | |
| 6.1 | Installation of the outside unit | 11 |
| 6.1.1 | General | 11 |
| 6.1.2 | Basic programming / Initial | 13 |
| 6.1.3 | Setting the east / west limits | 14 |
| 6.1.4 | Programming of satellite positions | 15 |
| 6.1.5 | Automatic location of satellites | 17 |
| 6.1.6 | External programming | 19 |
| 6.1.7 | System options | 20 |
| 6.2 | Connecting a video recorder or decoder | 22 |
| 6.3 | Menu overview: System menu | 23 |
7 | Operation | 24 | |
| 7.1 | General | 24 |
| 7.2 | Direct operation | 25 |
| 7.3 | Menu operation | 26 |
| 7.3.1 | Channel selection | 26 |
| 7.3.2 | Satellite selection | 27 |
| 7.3.3 | Setting the timer | 28 |
| 7.3.4 | Setting the clock | 29 |
| 7.3.5 | Alignment - dish position | 30 |
| 7.3.6 | Parental channel lock | 31 |
8 | Programming | 31 | |
| 8.1 | General | 31 |
| 8.2 | Changing the channel sequence | 32 |
| 8.3 | Expanding the programme range of a satellite | 33 |
| 8.4 | Programming the channels of a new satellite | 34 |
| 8.5 | Changing the channel name | 35 |
| 8.6 | Changing channel parameters | 37 |
| 8.6.1 | 37 | |
| 8.6.2 | 38 | |
| 8.6.3 | 39 | |
| 8.7 | Menu overview: main menu | 40 |
9 | Channel Programming | 41 | |
10 | Technical Specifications | 45 |
2