TechniSat ST 6002 S manual Frequency shift

TechniSat ST 6002 S

E N T E R

E N T E R

Frequency shift

It is possible to tune in the receiver to the frequency of the LNB should it not be supplying the exact IF-frequency:

1.Select a channel which is already stored, and which is trans- mitting in the 11GHz range. Switch the receiver into stand-by mode and call up the System Menu by holding down the

buttons on the front panel simultaneously

2.First select the option “Change system options”, then “Glo- bal shift LNB”. The blue background disappears and you can view the selected channel.

3.Tune the frequency up or down using the buttons (AFC +/-15, 0.25MHz steps). Once you have achieved the best picture quality you can store the frequency shift by pressing

ENTER.

NOTE: This affects all 11GHz channels

4.You can also alter the 12GHz range. First select a 12GHz channel and proceed as above. Press CNCL to leave System Menu

C N C L

21