TechniSat ST 6002 S
6.1.2 Basic Programming / Initial Set Up
Initially to program the receiver you have to carry out a Master
Reset. Therefore, move the cursor 
to the option "Master
Reset" on the System Menu and press ENTER.
E N T E R
After the first press a red warning screen appears. This will disappear when you press ENTER twice more and your recei- ver is then set.
E N T E R
ATTENTION: The preprogramming of the receiver is not affec- ted by the cancellation procedure. This data is in the memory and cannot be deleted.
E N T E R
After the third press the message "All memory cleared" will appear and you will immediately return to the System Menu. This time the arrow is pointing to "Set Dish Limit".
13
