Panasonic PV-GS250 ª Installing Video Stream Driver, Click Video Stream Driver, Click OK

With a PC

ªInstalling Video Stream Driver

Install this when your OS is Windows XP SP1 or later, or Windows 2000 SP4 or later. (When your OS is Window XP SP2 or later, installing video stream driver is not needed.) Video Stream Driver must be installed when you connect the Camcorder to the PC with the USB cable and use MotionDV STUDIO.

DirectX 9.0b is installed in your PC if it is not installed beforehand.

≥When DirectX 9.0b is installed, applications supported by previous versions of DirectX may not run. In this case, consult the manufacturers of the applications disabled.

1Insert the supplied CD-ROM into the personal computer’s CD-ROM drive.

≥Quit all applications. ≥[Setup Menu] appears.

2Click [Video Stream Driver].

≥The set up program starts running.

3For Windows XP users:

Depending on your system environment, installation of “DirectX 9.0b” may be required. Click [Yes] and continue with installation.

≥After “DirectX 9.0b” is installed, the computer will restart.

≥Do not remove the CD-ROM.

≥Installation may take a little while.

4 Finish installation by following the on-screen instructions.

≥Click [Next] and proceed with installation. ≥After completing the installation, Click

[Finish].

5Click [OK].

ªInstallation of MotionDV STUDIO 1 Insert the supplied CD-ROM into the

personal computer’s CD-ROM drive.

≥Quit all applications. ≥[Setup Menu] appears.

2 Click the [MotionDV STUDIO].

3Click [Next].

≥After reading the displayed contents, please carry out the installation according to

instructions.

4Select the Video system.

5After the completion of setup, click on [Finish].

≥Sample data is installed concurrently with the MotionDV STUDIO software.

6Click [Finish].

57

LSQT0862