Panasonic PV-GS250 Setting date and time, Adjusting LCD monitor/viewfinder, ª About date/time

Models: PV-GS250

1 90
Download 90 pages 13.79 Kb
Page 23
Image 23
Setting date and time

Before using

Setting date and time

If the screen shows the incorrect date/time, then adjust it.

Set to Tape Recording Mode or Card

Recording Mode.

1Set [BASIC] >> [CLOCK SET] >> [YES].

2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.

The year will change as follows: 2000, 2001, ..., 2089, 2000, ...

The 12-hour clock is used.

3Press the joystick to determine the setting.

The clock function starts at [00] seconds.

ªAbout date/time

The date and time function are driven by a built-in lithium battery.

Make sure to check the time before recording because the built-in clock is not very accurate.

ªRecharging the built-in lithium battery

If [0] or [--] is indicated when the Camcorder is turned on, then the built-in lithium battery has run down. Connect the AC adaptor to the Camcorder or place the battery on the Camcorder, and the built-in lithium battery will be recharged. Leave the Camcorder as is for approx. 24 hours, and the battery will drive the date and time for approx. 6 months. (Even if the [OFF/ON] switch is set to [OFF], the battery is still being recharged.)

Adjusting LCD monitor/viewfinder

ªAdjusting the brightness and color

level

1Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].

2Move the joystick up or down in order to

select the item to be adjusted. [LCD SET]

≥Set to Tape Recording Mode or Card : Brightness of the LCD monitor

1Set [BASIC] >> [CLOCK SET] >> [YES]. : Color level of the LCD monitor [EVF SET]

EVF : Brightness of the viewfinder

3Move the joystick left or right to move the bar indication representing the brightness.

4Press the [MENU] button or the joystick to complete the settings.

In order to adjust the brightness of the viewfinder, close the LCD monitor, and the

viewfinder will be activated.

When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted.

These settings will not affect the images actually recorded.

23

LSQT0862

Page 23
Image 23
Panasonic PV-GS250 Setting date and time, Adjusting LCD monitor/viewfinder, ª About date/time, Set BASIC CLOCK SET YES