10 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Preparation
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
Note:
LIt is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
LActual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
LBattery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
LEven after the handset is fully charged,
the handset can be left on the charger
without any ill effect on the batteries.
LThe battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the
charger and charge for at least 7 hours.
Symbols used in these operating instructions
Battery icon Battery strength
5High
6Medium
7Low
When flashing: Needs
to be charged.
Operation Operating time
In continuous use KX-TGA715:
12 hours max.
KX-TGA717:
10 hours max.
In continuous
standby mode
150 hours max.
Symbol Meaning
{j/OK}Press {j/OK}.
iProceed to the next
operation.
“ ” Select the words in
quotations shown on the
display (e.g., “Handset
Setup”) by pressing {^}
or {V}.
TGA715E_717E(e-e).book Page 10 Wednesday, August 2, 2006 2:46 PM