Handset/Base Unit Settings
Base unit settings
Base unit | Feature (default setting) | |
settings menu |
|
|
Ringer Volume | — | Base unit ringer volume (Medium) |
Call Options | Recall/Flash | Change the recall time (“100 msec.”).*1 |
Other Options | Base Unit PIN | Change base unit PIN (“0000”).*2 |
|
| – Enter the current |
|
| iEnter the new |
|
| i{j/OK} |
| Repeater Mode | (“Off”) |
*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.
Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or daily. Set the date and time beforehand (page 16).
1{j/OK} i“Handset Setup” i{>}
2“Time Settings” i{>}
3“Alarm” iPress {>} 2 times.
4Select an alarm mode. i{>}
Off | Turns alarm off. Press {>} again, then press {ih} to finish. |
Once | The alarm sounds once at the set time. Enter the desired day and month. |
Daily | An alarm sounds daily at the set time. |
5Enter the desired hour and minute. i{j/OK}
6Select the desired ringtone. i{>}
7“Save” i{>} i{ih}
Note:
LTo stop the alarm, press any dial key.
LWhen in talk or intercom mode, the alarm will not sound until the call has ended. LIf you select “Once”, the setting will change to “Off” after the alarm sounds.
18 | Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
