3.Push the Start/Enter pad. The Minute Timer will begin counting down immediately after the timer is started.

When time is up, “End”will show in the large display and you will hear four 2-second tones. You will also hear four 1-second tones every minute until you push one of the two Timer pads.

NOTE: To disable the reminder tones, push and hold the Timer Set pad for 4 seconds. To reactivate the tones, follow the same procedure.

To cancel the Minute Timer:

l Push

the Timer Cff pad. The time of day will

TIMER

show

in the display.

 

Using the Off/Cancel pad

The Off/Cancel pad will cancel any command pad except for the ClocWSet and Timer Set pads. When you push the Off/Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time remaining.

Audible signals

Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.

To shut off all signals except for the end-of- timer tone:

1.Press and hold the Stop Time pad for 4 seconds.

2.A short tone will sound to tell you the signals have been changed.

Repeat the above steps to turn the signals back on.

1 c

Page 10
Image 10
Whirlpool RM280PXA warranty Using the Off/Cancel pad, Audible signals, To cancel the Minute Timer