Panasonic KX-TGA717E Displays, Connections, Display icons Display Meaning icon, Location

TGA715E_717E(e-e).book Page 8 Wednesday, August 2, 2006 2:46 PM

Preparation

Displays

Display icons

Display Meaning icon

wWithin range of a base unit

LWhen flashing: Handset is searching for base unit. (out of range of base unit, handset is not registered to base unit, no power on base unit)

LHandset is accessing base unit. (intercom, paging, changing base unit settings, etc.)

kHandset is on an outside call.

uAnswering system is on.*1 (page 19)

5Battery strength

[2]Handset number (Standby display setting, page 16)

LLine is being used by another handset.

LAnswering system is being used by another handset or the base unit.

*1 For KX-TG7120/KX-TG7160/KX- TG7180/KX-TG8120/KX-TG9120/KX- TG9140/KX-TG9150 users only

Connections

Connect the AC adaptor to the charger and route the cable as shown. The charger can be mounted on the wall, if required.

Hooks
25 mm	(220–240 V,
	50 Hz)

Screws

Use only the included AC adaptor.

Note:

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

Location

LFor maximum distance and noise-free operation, place your base unit:

–away from electrical appliances such as TVs, radios, personal computers or other phones.

–in a convenient, high and central location.

8 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333