PRIMARY MAINTENANCE

Generally, wash foam-type filters In a dlshwashlng detergent and water solution. Rinse and wring dry, then saturate with oll and squeeze out excess. Failure to re-oil this type filter will ruin the engine.

Clean paper elements by tapping lightly. Blowing with air will

ruPture paper elements.

Use a flashlight to detect clogged or torn paper elements - replace if damaged in any way.

Dirt can also be Introduced into an engine In dirty fuel from a contaminated

container. Always use clean fresh fuel from a clean

container to guard against

dirt, sludge and water contamination.

Be aware that fuel breaks down In storage and forms lummy compounds which will block carburetor pass-

ages. Never use fuel more than 3 months old. Drain

tank then run the engine out of fuel before storing during the off-eeason.

Air Is also needed to keep your engine cool. Dirt, dust

&debris bund up to restrict and clog cooling air intake screens and fins. Clean

screens and fins at frequent Intervals. The engine blower housing and shrouds should be removed at least once each season or more often

under dry, dusty conditions ifor a thorough cleaning of fins.

Failure to keep external surfaces clean not only presents fire hazards, but causes overheating and

resulting engine damages such as:

1.distorted valve guides

2.sticking valves

). 3. scuffed walls

}4. oversl_dlng

5.loss of power

6.complete failure of engine.

An engine must also have proper lubrication.

All engines use some oil On 4-cycle engines,

CHECK OIL LEVEL BEFORE EACH START-UP.

Wipe area clean around the oll check plug or dipstick opening to keep dirt from falling Into the engine when checking the o11. Always check with the machine on a level surface.

On engines with dipstick, keep the level up to, but not over, the FULL mark. When adding o11, allow time for all of the oil to flow down the fill tube to prevent a false full reading when the level could actually be low and result In engine damage.

39

Page 39
Image 39
Snapper WLT200H481BV2, WLT180H421BV2 important safety instructions Scuffed walls, Check OIL Level Before Each START-UP

LT200H481BV2, WLT180H421BV2, WLT200H481BV2, LT180H421BV2 specifications

The Snapper LT180H421BV2, WLT200H481BV2, WLT180H421BV2, and LT200H481BV2 are versatile riding lawn mowers that cater to homeowners seeking efficient lawn care solutions. Each model is engineered with a combination of power, durability, and advanced features, making them suitable for a variety of yard sizes and terrains.

The Snapper LT180H421BV2 is powered by a robust 18 HP Briggs & Stratton engine, providing reliable performance and ease of use. With a 42-inch cutting deck, this model offers a balance between maneuverability and cutting efficiency. The LT180H421BV2 features a comfortable high-back seat, allowing users to enjoy extended mowing sessions without discomfort. Its steering system is designed for effortless control, making it ideal for navigating around trees and flower beds.

On the other hand, the WLT200H481BV2 boasts a more powerful 20 HP engine, paired with a wide 48-inch cutting deck. This model is equipped with a hydrostatic transmission for smooth acceleration and deceleration, allowing for a responsive and enjoyable mowing experience. The WLT200H481BV2 also includes a dual-blade system, enhancing cutting performance and delivering a clean, manicured finish.

The WLT180H421BV2 combines the advantages of its counterparts with an 18 HP engine and a 42-inch cutting deck. This model is designed for both efficiency and power, making it suitable for homeowners with medium to large lawns. Its compact design enables easy storage and maneuverability in tight spaces, while still offering a comfortable operator experience.

Lastly, the LT200H481BV2 features a powerful 20 HP engine alongside a 48-inch cutting deck, representing the pinnacle of Snapper's residential riding mower technology. It incorporates a premium cut quality with its innovative three-blade system. The hydrostatic transmission ensures smooth operation, allowing users to tackle any lawn challenge effectively.

All these models showcase Snapper’s unwavering commitment to quality and innovation, making lawn maintenance a more efficient and enjoyable task. With comfortable seating, ergonomic controls, and durable construction, the LT180H421BV2, WLT200H481BV2, WLT180H421BV2, and LT200H481BV2 are designed for performance and convenience. These mowers truly exemplify the perfect blend of technology and functionality for today's homeowners.