Section 5 - ADJUSTMENTS & REPAIR

5.9HYDRAULIC SYSTEM, PURGING

After replacing or repairing hydraulic system components, one or both of the wheel drives may not pull properly. This is likely to be caused by air entrapped in the system. If you experience a pulling issue after completing repairs, perform the following procedure to purge the air from one or both of the hydraulic drive systems.

IMPORTANT: WHEN REPLACING THE HYDRAULIC FLUID FILTERS, PRE-FILL BOTH WITH OIL (SAE 20W50 API SL) BEFORE INSTALLING. PRE-FILLING THE FILTERS WITH OIL WILL REDUCE OR POSSIBLY ELIMINATE THE NEED TO PURGE THE SYSTEM OF ENTRAPPED AIR

1.Locate hydraulic reservoir underneath operator’s seat. After thoroughly cleaning the area around the top of the reservoir, remove filler cap. Bring fluid to proper level (1 ½” below the top of the filler neck). With engine off, add SAE 20W50 automotive oil. See Figure 4.6.

2.Open pressure relief valve on hydraulic pump, turning counter clockwise 2 full turns. See Figure

3.Carefully raise the rear of the machine so the wheels are off of the ground. Securely block the machine to prevent it from falling.

4.While seated in the operator’s position, start the engine. Place engine speed control in FAST position.

5.Release parking brake and move motion control levers out of the neutral lock position.

6.Slowly move motion control levers to the full forward and then to the full reward positions. Repeat this process 6 times.

7.Stop engine and wait for all rotation to stop before leaving the operator’s position.

8.Close pressure relief valve on hydraulic pump, turning clockwise. Tighten snuggly.

9.With pressure relief valve closed, repeat Steps

4thru 7.

10.Remove blocks and lower rear of machine.

11.Check fluid level in reservoir. Add SAE 20W50 automotive oil as required to bring fluid level to 1 ½” from top of filler neck. Do Not over fill.

12.Install and tighten filler cap.

29

Page 27 Page 29
Page 28
Image 28
Snapper NZM19480KWV, NZM21520KWV important safety instructions Hydraulic SYSTEM, Purging
Page 27 Page 29

NZM19480KWV, NZM21520KWV specifications

The Snapper NZM19480KWV and NZM21520KWV are standout offerings in the realm of robust mowers, designed to cater to both residential and commercial users seeking efficiency and versatility. These models embody Snapper’s commitment to quality engineering and innovative features that simplify the mowing experience while delivering exceptional performance.

At the heart of both models is a powerful engine, ensuring reliable operation even in the most challenging terrains. The NZM19480KWV features a robust 48-inch cutting deck that allows for a wider cutting path, significantly reducing mowing time. This makes it an optimal choice for larger lawns and landscapes. In contrast, the NZM21520KWV showcases a slightly smaller but efficient 52-inch deck, ideal for tackling intricate yard designs while maintaining maneuverability.

Both mowers are equipped with Snapper's unique Pivoting Front Axle technology, which enhances stability and control. This feature allows the mower to navigate uneven ground smoothly, ensuring a consistent cut regardless of the terrain. The optimized weight distribution contributes to improved traction and handling, making both models suitable for diverse mowing conditions.

The user-friendly design of these mowers is another highlight. They feature a comfortable, adjustable seat with easy-grip controls, allowing operators to navigate their lawns with ease. Additionally, the intuitive dashboard provides real-time information regarding engine performance and fuel levels, enhancing the mowing experience and ensuring that users can focus on achieving the best results.

One of the standout technologies employed in the Snapper NZM19480KWV and NZM21520KWV is the electric start feature. This innovation eliminates the hassle of manual starting, allowing users to begin mowing with the push of a button. Furthermore, both models come with a robust transmission system that ensures smooth acceleration and responsive handling.

In summary, the Snapper NZM19480KWV and NZM21520KWV are exemplary choices for anyone seeking reliable, durable, and efficient mowers. With powerful engines, advanced technologies, and user-friendly designs, these models not only streamline the mowing process but also ensure a pristine lawn appearance. Whether for residential gardening or commercial landscaping, Snapper’s engineering excellence stands out.
Top Page Image Contents