IBM xSeries 330 manual Error Code/Symptom

Error Code/Symptom			FRU/Action
035-253-S99	(RAID adapter	1.	ServeRAID Adapter in slot S is not configured properly. Obtain
initialization failure)			the basic and extended configuration status and refer to the
			ServeRAID Hardware Maintenance Manual for more information.
		2.	Cable
		3.	SCSI Backplane
		4.	Adapter
089-XXX-001	(Failed Microprocessor	1.	Microprocessor 1
test)		2.	System Board
089-XXX-002	(Failed	1.	Microprocessor 2
Optional Microprocessor test)		2.	System Board
165-XXX-000	(Failed Service Processor	1.	System Board
test)
180-XXX-000	(Diagnostics LED failure)	1.	Run Diagnostic LED test for the failing LED.
180-XXX-001	(Failed information LED	1.	Switch Card / Information LED Panel
panel test)
180-XXX-003	(Failed System Board LED	1.	System Board
test)
180-XXX-005	(Failed SCSI	1.	SCSI Backplane
Backplane LED test)		2.	SCSI Backplane Cable
		3.	System Board
201-XXX-0NN	(Failed Memory test,	1.	DIMM Location slots 1-4 where NN = DIMM location.
see "Memory Settings" on page 33)			Note: NN 1=DIMM 1 NN 2=DIMM 2 NN 3=DIMM 3 NN
			4=DIMM 4
		2.	System Board
201-XXX-999(Multiple DIMM failure, see		1.	See error text for failing DIMMs
error text)		2.	System Board
202-XXX-001	(Failed System Cache	1.	Microprocessor 1
test)		2.	System Board
202-XXX-002	(Failed System Cache test)	1.	Microprocessor 2
		2.	System Board
206-XXX-000	(Failed Diskette Drive	1.	Try test with another diskette
test)		2.	Cable
		3.	Diskette Drive
		4.	System Board
215-XXX-000	(Failed IDE CD-ROM	1.	CD-ROM Drive Cables
test)		2.	CD-ROM Drive
		3.	System Board
217-XXX-000	(Failed Fixed Disk	1.	Fixed Disk 1
test)		2.	System Board
Note: If RAID is configured, the fixed
disk number refers to the RAID
logical array
88 Hardware Maintenance Manual: xSeries 330