IBM xSeries 330 manual Error Code/Symptom

		Error Code/Symptom			FRU/Action
5962		(IDE CD-ROM configuration		1.	Run Configuration/Setup
error)				2.	CD-ROM Drive
				3.	CD-ROM Power Cable
				4.	IDE Cable
				5.	System Board
				6.	Battery
8603	(Pointing Device Error)			1.	Pointing Device
				2.	System Board
00019501		(Processor 1 is not functioning		1.	Processor 1
- check VRM and processor LEDs)				2.	System Board
00019502		(Processor 2 is not functioning -		1.	Processor 2
check VRM and processor LEDs)				2.	System Board
00019701		(Processor 1 failed)		1.	Processor 1
				2.	System Board
00019702		(Processor 2 failed)		1.	Processor 2
				2.	System Board
00180200		(No more I/O space		1.	Run Configuration/Setup
available for PCI adapter)				2.	Failing Adapter
				3.	System Board
00180300		(No more memory above		1.	Run Configuration/Setup
1MB for PCI adapter)				2.	Failing Adapter
				3.	System Board
00180400		(No more memory below		1.	Run Configuration/Setup
1MB for PCI adapter)				2.	Move the failing adapter to slot 1 or 2
				3.	Failing Adapter
				4.	System Board
00180500		(PCI option ROM		1.	Remove Failing PCI Card
checksum error)				2.	System Board
00180600		(PCI adapter self test)		1.	Run Configuration/Setup
				2.	Move the failing adapter to slot 1 or 2
				3.	Failing Adapter
				4.	System Board
00180700, 00180800			(General PCI	1.	System Board
error)				2.	PCI Card
01295085		(ECC checking hardware		1.	System Board.
test error)				2.	Processor
01298001		(No update data for		1.	Ensure all processors are the same stepping level and cache size.
processor 1)				2.	Processor 1
01298002		(No update data for		1.	Ensure all processors are the same stepping level and cache size.
processor 2)				2.	Processor 2

94 Hardware Maintenance Manual: xSeries 330