IBM xSeries 330 manual Turn on the server and watch the screen

1.Turn on the server and watch the screen.

If the server is on, shut down your operating system and restart the server:

2.When the message F2 for Diagnostics appears, press F2.

If a power-on password is set, the server prompts you for it. Type in the appropriate password; then, press Enter.

3.When the Diagnostic Programs screen appears, select Utility from the top of the screen.

4.Select View Test Log from the list that appears; then, follow the instructions on the screen.

The system maintains the test-log data while the server is powered on. When you turn off the power to the server, the test log is cleared.

Chapter 3. Diagnostics 17