Select this choice to view or change the assignments for devices and input/output ports. This choice appears only on the full Configuration/Setup Utility main menu.
This choice also allows you to enable or disable the integrated SCSI, and Ethernet controllers.
—The default setting is Enable for all the controllers. If you select Disable, the system will not configure the disabled device and the operating system will not see the device. (This is equivalent to unplugging the device.)
—If the
Select System Service Processor Settings to view the
•Date and Time
Select this choice to set the system date and time and to change the system time sent to the Advanced System Management Processor (service processor) when the server is started. This choice appears only on the full Configuration/Setup Utility main menu.
The system time is in a
You can set a time delta to be added or subtracted from the system time that is sent to the service processor (Advanced System Management Processor) each
time the server is started. Use the number keys to enter the hours and minutes and + or − to add or subtract from the system time. If you want the system clock time to be the same as the Advanced System Management Processor clock time, leave the value set at its default of 0.
•System Security
Select this choice to set passwords or a system owner’s name. This choice appears only on the full Configuration/Setup Utility main menu.
You can implement two levels of password protection:
—Power-on Password
Select this choice to set or change a
—Administrator Password
Select this choice to set or change an administrator password.
Attention: If an administrator password is set and then forgotten, it cannot be overridden or removed. You must replace the system board.
The administrator password provides access to all choices on the Configuration/Setup Utility main menu. You can set, change, or delete both
