IBM xSeries 330 manual Choices available from the PXE boot agent utility, Network Boot Protocol

Note: By default you will have 2 seconds after the prompt appears on the screen to press Ctrl+S.

3.Use the arrow keys or press Enter to select a choice from the menu.

•Press Esc to return to the previous menu.

•Press the F4 key to exit.

4.Follow the instructions on the screen to change the settings of the selected items; then, press Enter.

Choices available from the PXE boot agent utility

The following choices appear on the PXE boot agent utility menu:

•Network Boot Protocol

PXE is the default value for this menu item.

Note: Do not change this value. There are no other network boot protocols supported.

•Boot Order

Select this choice to change the order in which boot devices are queried.

—Try local drives first, then network (Default)

—Try network only

—Try local drives only

—Try network first, then local drives

•Show setup prompt

Select this choice to either display the PXE setup prompt or disable it. Disable is the default setting.

When this choice is enabled Press Ctrl+S to enter the setup menu will appear on the screen under the initializing prompt.

•Setup time wait menu

Select this choice to set up the amount of time (in seconds) that the system will pause during initialization for a Ctrl+S input.

—2 seconds (Default)

—3 seconds

—5 seconds

—8 seconds

•Legacy OS wake up support Select this choice to

allow/disallow a non-windows operating system to use adapter remote wake up capability.

—Disabled (Default)

—Enabled

38 Hardware Maintenance Manual: xSeries 330