Xerox 100 Holding queues, Releasing queues, Rebooting the system warm boot, Managing the system

Managing the system

Holding queues

Before rebooting or powering off the system, hold all active queues. A held queue does not release any jobs for printing, nor accept any jobs that are sent to it.

On the Queue Manager window, do the following for each active queue:

1.Right click the queue name.

2.From the Properties menu, select [Do Not Accept Jobs] or [Do Not Release Jobs], as appropriate.

To hold all queues:

1.Right click in the queue list section, and select [Select All] from the pop-up menu.

2.Right click again in the queue list section and select [Do Not Accept Jobs].

3.Right click in the queue list section, and select [Do Not Release Jobs].

Releasing queues

After rebooting or powering on the system, release all held queues.

On the Queue Manager window, do the following for each active queue:

1.Right click the queue name.

2.From the pop-up menu, select [Accept Jobs] or [Release Jobs], as appropriate.

To release all queues:

1.Right click in the queue list section, and select [Select All] from the pop-up window.

2.Right click again in the queue list section, and select [Accept Jobs].

3.Right click in the queue list section, and select [Release Jobs].

Rebooting the system (warm boot)

1.On the DocuSP Print Services window, click the [Queue Manager] icon.

2.Hold all queues. (Refer to “Holding queues,” earlier in this chapter.)

3-2 Operator Guide