Xerox 100, 180 EPS manual Troubleshooting, 10Area, area

Troubleshooting

Figure 5-10 Area 9

To clear jams from area 9:

1.Lower and pull out tray 1 to give you better access to area 9.

2.Pull the area 9 green lever toward you to unlatch it. Be sure to relatch the lever after you have cleared any paper in this area. To further facilitate removing sheets wedged in this area, pull out tray 1 and hold the green lever down.

3.Turn the green knob (located to the right of the lever), to move jammed sheets further along the paper path to where they are more accessible and easier to remove.

4.If paper rips as you are removing it from area 9, or if you have difficulty removing paper from this area, use the pinch lever located further inside area 9. Paper may be caught in this area during duplex printing.

Using the pinch To use the pinch lever located inside area 9: lever to access

area 9

CAUTION: This area of the printer may be hot. Be careful when inserting your hand.

1.Locate the green pinch lever directly behind area 9 (above the green knob and further inside area 9).

2.Carefully reaching your hand into the area, squeeze the edges of the pinch lever and lift it up.

3.Remove any paper caught in this area.

5-2 4 Operator Guide