Xerox 100, 180 EPS manual Feeder/stacker modules, Overview

Overview

2. Please Wait indicator on stacker bins

3. Bin Unload button on stacker

4. In Use indicator on stacker bin

Ready to Unload	When this indicator glows, you can remove printed sheets from
indicator on	the stacker bin.
stacker bins
Please Wait	When this indicator glows, the elevator is in motion. This indicator
indicator on	turns off when the platform reaches its destination.
stacker bins

Bin Unload button on stacker

In Use indicator on stacker bin

Lowers the bin elevator.

•If the bin is in use when this button is pressed, the printed pages begin stacking in the other stacker bin, if auto switching has been enabled.

•If the bin is not in use, pressing this button does not affect printing operations.

When this indicator glows, the bin has been made ready to receive output.

Feeder/stacker modules

The feeder/stacker modules contain the high-capacity feeder trays and the stacker bins. The printer may have up to four feeder/ stacker modules (including the inverter feeder/stacker), containing feeder trays 3, 4, 5, and 6, and stacker bins A, B, C, and D. Each module contains one high-capacity feeder tray and one high capacity stacker bin.

High-capacityThe high-capacity feeder (HCF) trays are located in the bottom

feeders half of the feeder/stacker modules. Each HCF tray can hold up to 2500 sheets of 20 pound or 80 gsm paper.

The high-capacity feeder trays can handle paper sized from 8 by 10 inches / 203 by 254 mm to 17 by 14.02 inches / 432 by 356 mm.

Unlike the processor feeder trays, the HCF trays have Paper Level switches, which detect the position of the elevator to determine the fullness of the tray.

High-capacityThe high-capacity stacker (HCS) bins are located in the top half of

stackers the feeder/stacker modules, accessed through double doors.

Two high-capacity stacker bins are standard, with up to two additional bins available as options (providing up to four bins total). Each bin holds up to 2500 sheets of 20 pound or 80 gsm paper.

Inverter The inverter is part of the inverter feeder/stacker module. It allows for proper collation of the print job. It also directs printed output to the sample tray, when required.

1-1 4 Operator Guide