Xerox 180 EPS, 100 manual Overview, Operator Guide

Overview

printer). After the job has successfully printed, it is removed from the Output Queue and also from the Input Queue, if the Input Property for the queue is set to spool.

The ps –e or ps –ef commands can be used to list the system software processes. A varying process identification number is listed along with each process.

NOTE: The printing process and job flow is different for PostScript, PCL, TIFF, ASCII, PDF jobs (that is, non-LCDS jobs) and for LCDS jobs.

PostScript, PCL, When the job is sent from the application for printing, a print data

TIFF, ASCII, and PDF file is created. This file becomes the job that is submitted to the

jobs printer for printing. The print data file and the job request are submitted to the selected queue. Jobs are processed by priority within the designated queue once the job reaches the queue from a given application.

The following graphic illustrates the priority that each setting has in printing the job. For example, queue override settings in a job take precedence over exception page or job ticket settings.

Operator Guide 1- 7