Xerox 100, 180 EPS manual 2-10, Managing the printer, Points to note for containers

Managing the printer

5.If you are using a container or pallet, empty it and return it to the stacker bin.

Points to note for containers:

•The empty container must be the same size as the previous container if the bin is in an auto switching combination, or if the print job is not complete and stacking continues into the bin.

•A different size container may be used if the bin is not selected for use or is not in an auto switching combination.

•To switch from containerless stacking to stacking in a container or on a pallet (for “pallet only” stacking), press and release the green button on top of the stacker bin platform.

Figure 2-14 Press and release green button

•To switch from stacking into a container or pallet to containerless stacking, slide the green tab (located on top of the stacker bin platform) forward until you hear a click. The following figure shows the green tab location.

Figure 2-15 Slide green tab forward

2-10 Operator Guide