Xerox 100, 180 EPS manual Using consumables, Adding fuser agent, Maintaining the system

Maintaining the system

Using consumables

The following tasks are part of maintaining your system:

•Adding fuser agent

•Replacing the dry ink waste container

•Replacing the dry ink cartridge

•Using the custom transfer assist blade

Adding fuser agent

WARNING: Fuser agent contains silicone, which can cause irritation upon contact with the eyes. Be sure to wash your hands with soap and water after you finish this procedure.

To add fuser agent:

1.Open the right and left doors of the printer and locate the fuser area.

Figure 4-3The fuser area

2.Place a dropcloth on the floor under the fuser area.

3.Grasp the green handle on the fuser drawer and pull it out until it stops.

4-4 Operator Guide