Xerox 180 EPS, 100 manual Moving the controller, Overview, Operator Guide

Overview

Offline interface The Xerox DocuPrint 100/115/135/155/180 EPS supports three types of peripheral devices from which you can import resource files such as forms, fonts, and JSLs, and receive print data from tape. These devices are called “peripheral” because they handle media external to the system disk.

The following drives are supported:

•26-track cartridge tape drive (QIC)

•9-track reel tape drives

•36-track cartridge tape drives

Moving the controller

To ensure consistent performance and avoid any damage to equipment, follow these rules for placing the components of the workstation controller:

•Use the controller stand that comes with your printing system equipment.

•Keep the processor in an upright, vertical position as illustrated below.

•Allow at least 6 inches / 152 mm of unobstructed space at the front and rear of the processor, so the fan and vents are not blocked.

Figure 1-19 Sun Blade 1000/2000 fan/vent locations to keep clear

Operator Guide 1- 27