Xerox 180 EPS, 100 manual Clearing a paper jam in the bypass transport, Troubleshooting, 19Area

Troubleshooting

NOTE: If your printer has frequent jams in this area, you may need to clean the Q1106 sensor.

Figure 5-19 Area 18

Points to note for clearing jams in area 18:

•Sometimes the display monitor messages direct you to discard the last sheet delivered to the stack following a jam in area 18. Check for this message when clearing an area 18 paper jam.

•If your printer has frequent jams in this area, you may need to clean the Q1107 sensor.

•If your printer has a bypass transport module, you should check for paper jams in areas 19 and 20 after clearing an area 18 paper jam.

Clearing a paper jam in the bypass transport

1.Open the bypass transport module door.

2.Press the area 19 green lever in the direction of the arrow printed on it.

Operator Guide 5- 29