Xerox 180 EPS, 100 manual Support and interface with feeders, Operator Guide, Overview

Overview

Figure 1-11 Printer with inverter feeder/stacker + feeder/stacker +

bypass transport

Figure 1-12 Printer with inverter feeder/stacker + feeder/stacker +

feeder/stacker + bypass transport

The illustrations above show a printer with two feeder/stacker modules and a bypass transport, and a printer with three feeder/ stacker modules and a bypass transport. With the bypass transport installed, the printer can support up to three feeder/ stacker modules, including the inverter feeder/stacker.

Paper stocks The bypass transport accepts all paper stocks on which the printer

supported on can print, and it accommodates simplex and duplex printing. bypass transport

DFA support The bypass transport meets the Xerox Document Feeding and Finishing Architecture (DFA) specifications. The system software supports DFA. However, in order for the bypass transport to function correctly, you need to set up finishing personality profiles to identify your finishing device to the printing system. (The customer support representative for your finishing device can give you the information you need to create a personality profile for your third-party finishing device.)

Support and interface with feeders

For information on marketing partners that provide solutions for support and interface with feeders, contact your local Xerox sales representative.

Operator Guide 1- 17