Xerox 100, 180 EPS manual Overview, 248 pitch mode paper sizes, Maximum paper size for 8 pitch mode

Overview

Using small paper Printing in 8 pitch mode provides the highest throughput speed

sizes in 8 pitch available (up to 206 ppm). However, keep the following in mind

mode when you select the paper you want to use for this mode:

•Paper sizes smaller than 8 inches / 203 mm in width are supported only when the optional 7 inch paper kit is installed on the printer.

•The leading edge of any paper used in the printer cannot be less than 10 inches / 254 mm long.

The following figure illustrates the maximum and minimum paper sizes supported in 8 pitch mode.

Figure 1-24 8 pitch mode paper sizes

1.Maximum paper size for 8 pitch mode

2.Minimum paper size for 8 pitch mode

3.Travel direction of sheets out of paper tray

Using large paper Large paper sizes with widths of 15.31 to 17 inches / 389 to 432

sizes in 3 pitch mm are supported only in 3 pitch mode and must feed short edge

mode first. These paper sizes slow down the throughput speed. Therefore, a short edge feed job takes longer to print than a long edge feed job.

NOTE: The system can support 14 by 17 inch / 356 by 432 mm, 20 pound or 80 gsm paper stock in 3 pitch mode. However, printing performance is not guaranteed for all types of paper of this size. Heavy (110 pound / 200 gsm) and light (16 pound / 60 gsm) weight papers can cause jams throughout the system, and are not recommended.

The following figure illustrates the maximum and minimum paper sizes supported in 3 pitch mode.

1-3 4 Operator Guide