Xerox 100, 180 EPS Printer overview, Overview, Queue overrides 2.Exception pages 3.Job ticket

Overview

Figure 1-3 Submission and print order of jobs in a queue

1.Queue overrides

2.Exception pages

3.Job ticket

4.Submission print protocol (lp, lpr, nprint)

5.Set page device values/PCL copy count

6.Queue defaults

You can make changes to the printing attributes of a PostScript, PCL, TIFF, ASCII, and PDF job (that is, a non-LCDS job), as long as the job is not streaming. This includes changing the type of paper on which it is printed or specifying printing order from last page to first (N to 1).

Printer overview

The printer receives data from the controller and prints the document according to the print options specified by the user. The printer also stacks the printed output, collates it, and, if configured with one of the available optional third-party finishing devices, performs finishing functions such as binding, stitching, or perforating.

The Xerox DocuPrint 100/115/135/155/180 EPS printer is a monochrome printer. If it receives print jobs that contain color commands, it prints them in black or shades of gray.

Throughput speeds The Xerox DocuPrint 100/115/135/155/180 EPS prints LCDS data from a mainframe host computer, emulating an IBM 4245 or 3211 line printer. The printing system can receive data over a channel through bus and tag cables and through the Socket Gateway or lpr using TCP/IP.

1-8 Operator Guide