Xerox 180 EPS Checking job integrity following a paper jam, Troubleshooting, 2Jam clearance areas

Troubleshooting

Figure 5-2 Jam clearance areas

To clear a paper jam:

1.Open any printer doors necessary to access the area of the printer indicated by the messages on the display monitor.

2.Clear the jammed sheets from the area, following the instructions on the printer message labels and the messages on the display monitor.

NOTE: Occasionally you may find that the printer has already cleared the paper from an area and sent it to the sample or purge trays.

3.Close any printer doors that were opened.

4.Select the Continue button to resume printing.

5.Discard any damaged sheets that were sent to the sample tray or purge tray.

For additional paper jam information, refer to the following sections:

•Checking job integrity following a paper jam

•Clearing paper jams in printer areas 2 through 20

•Clearing a misfeed (feeder tray fault)

•Troubleshooting frequent misfeeds (processor feeder trays)

•Incorrect paper size message

Checking job integrity following a paper jam

When printing resumes following a paper jam, there is a slight possibility that duplicate sheets may be printed or sheets may be

Operator Guide 5- 17