Conﬁguring the LAN Emulation Clients LECs | 3Com 3C971-F instruction

3-14 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION

needed, you can use dummy IP numbers for the disabled clients.

19Select OK when the TCP/IP Conﬁguration is complete.

The reboot prompt shown in Figure 3-9 appears.

Figure 3-9Reboot Prompt for Adapter Driver

20Select Restart Now to reboot the computer.

Go to the next section to continue the installation of the 3C971-F adapter driver.

Conﬁguring the LAN Emulation Clients (LECs)

The LEC applications software included with your 3C971-F adapter provides a method for allowing one ATM adapter to communicate with up to four LAN emulation servers (LESs) at a time. In a typical LAN emulation network, the LAN emulation conﬁguration server (LECS) provides a central point of contact for LAN emulation clients to obtain conﬁguration information. The LECS provides the client with the MTU (Maximum Transfer Unit) size, ELAN name, and ATM address for the host LES. If your network does not contain an LECS, you have the option for setting each client to contact and join an LES directly instead of contacting the LECS.

Image 36

3Com 3C971-F manual Conﬁguring the LAN Emulation Clients LECs, Select OK when the TCP/IP Conﬁguration is complete

Contents

PCI 155 Fiber Network Adapter User Guide Lifetime Warranty Sweden, Finland, Norway 3C971-F Atmlink PCI 155 Fiber 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Troubleshooting Page Figures Prompt for Additional Channels How to Use This Guide About this GuideIntroduction Conventions Text Description Introduction 3C971-F ATMLink PCI Adapter Product Features 3C971-F Adapter Installation Kit Software DriversPCI Technology Introduction Hardware Installation Installation OverviewTools Required Installing the 3C971-F Adapter Save the screw for later in this section Installing the 3C971-F Adapter Press down gently and ﬁrmly on the board to seat it properly 3SC Duplex Connection Turn on the power to the computer Installation Windows NT DriverOverview Installation Procedures Overview System Requirements Installing the Adapter Device Driver 1Network Settings Screen Select the Add Adapter button. The dialog box in -2 appears Insert the device driver diskette in a ﬂoppy disk drive 3Selecting the Floppy Drive If needed, change the drive designation Select the OK button Edit the PCI adapter parameters Edit the signaling transport items 6Conﬁguring the Signaling Transport 7Completed Network Settings Select the OK button on the Network Settings screen Edit the TCP/IP parameters Windows NT Driver Installation Installing the Adapter Device Driver Select OK when the TCP/IP Conﬁguration is complete Select Restart Now to reboot the computerConﬁguring the LAN Emulation Clients LECs Set the value in the Interrupt list box 10LEC Conﬁguration Select the Conﬁgure button Elan Name blank Edit the LEC ATM Adapter items 11LEC ATM Adapter Conﬁguration Windows NT Driver Installation When all clients are conﬁgured, select the OK button Select the OK button to exit the LEC Conﬁguration dialog box Select OK Exit Windows NT and reboot the computer 12LECS/LES Reboot Prompt Removing a Windows NT Driver Select the Control Panel icon from the Main groupSelect the Remove button 14Conﬁrming Adapter and Driver Removal Click the OK button in the Network Settings screen Select the Restart Now button to reboot the computer Netware 4.1 Server Driver Installation Loading the Novell NetWare Server Driver Select Driver options Press Insert to install an unlisted driver 3Select Additional Driver Insert the 3Com 3C971-F driver diskette in a ﬂoppy drive 5Notes for Selecting a Drive Conﬁguring Network Channels Press Enter to select the driverSelect Yes to copy the driver ﬁles to the server Configuring Network Channels 9Conﬁguring TCP/IP Network Interface Edit Channel number 10Change IPX Frame Type Enter Elan Name Enter the LECS/LES network address Configuring Network Channels Select Save parameters and load driver Press Enter to accept the assigned number Do one of the following 15Prompt for Additional Channels Editing the AUTOEXEC.NCF File 17Selecting the NCF Files Editor From the system prompt, enter the command Removing a Driver from NetWare Select NCF ﬁles options Troubleshooting Startup Problems Bootup Problems Applications Problems Adapter Problems Specifications HardwareMemory Bus Interface Network Connections Standards Compliance Environment Range On-line Technical Services Access by Modem Access by Isdn Call the telephone number nearest you Log on to CompuServe Press Return to see the 3ComForum main menu Support from Your Network Supplier Returning Products for Repair Country Telephone Number Fax Number Glossary ATM Forum Call setup Call controlCell Cell switching Connectionless ATMEnd system Header Ilmi Mbps Packet switching MulticastMultimode Node Service bit rate Signaling Token ring Virtual circuit virtual channelVirtual path VPI Index Numerics LEC Limited Warranty 3Com Corporation FCC Class a Verification Statement Reader Comment Form 3Com Corporation Business Reply Mail