3Com 3C971-F manual Edit the LEC ATM Adapter items, 11LEC ATM Adapter Configuration

Configuring the LAN Emulation Clients (LECs) 3-17

Figure 3-11LEC ATM Adapter Configuration

The information required for the client to contact the LECS or the LES may vary according to the vendor of the server. For example, if you select the LECS option (radio buttons at bottom of dialog box in Figure 3-11), 3Com’s Cellplex 7000™ requires both the ELAN name of the LES you want the client to join and the 20-byte ATM Address of the configuration server. Refer to the documentation for your server(s) to determine the specific requirements.

7 Edit the LEC ATM Adapter items.

aSelect the client in the Client List Box that you want to configure.

You may configure the clients in any order that you wish; however, Client 0 must be fully configured before exiting the dialog box.

bEnable the client if desired.

Put an “x” in the Enable box (not editable for Client 0). All settings in the dialog box are ignored for any disabled clients.